Composite fire plate 04

Performance parameters of metal honeycomb plate

Project titanium honeycomb plate titanium zinc honeycomb plate stainless steel honeycomb plate anodized alumina honeycomb plate copper honeycomb plate

Thickness /mm (face and back plate are 0.5mm thick)

Area density/(kg/㎡

Tensile strength /MPa ≥0.6 ≥0.8 ≥0.6

Flat compression strength /MPa ≥0.8

Elastic modulus of flat pressure /MPa ≥30

Bending section coefficient We/ (mm cubed /mm) 6.742 9.57 9.51 9.55

We/bending section coefficient after (mm/mm) 0.92 x10 ⁷ 0.92 x10 ⁷ 1.90 x10 ⁷ 0.647 x10 ⁷ 0.793 x10 ⁷

Impact resistance without obvious deformation and damage

There is no delamination between heat resistant water - based panel and core material

Heat resistance difference

Face plate metal mechanical properties positive yield strength /MPa ≥160 ≥100 ≥295 ≥120 ≥195

Elastic modulus /MPa 106000 150000 200900 68200 108000

Back yield strength /MPa ≥205 ≥115 ≥205 ≥115 ≥115

Elastic modulus /MPa 106000 150000 200900 68200 108000